Introduction

• FK flange coupling:Shrink disc is independent locking system,so this type applies to endure bending moment.When shaft diameter is smaller than 160mm,the joining is H7/h6.On the contrary,the joining is H7/g6.Installation and removal is the same as shrink disc.FK flange coupling are also available with shrink disc of type HSD.


Applying Scene

Shaft diameter is from 70mm to 300mm and transmittable torque is from 6kNm to 595kNm.


Outline Dimension

聯(lián)軸器FK	軸徑	額定扭矩	鎖緊盤(pán)	擰緊力矩	基本尺寸				法蘭螺栓	擰緊力矩
型號(hào)	dw	Mt(Pax=0)	Shrink	Ma	N	b	L	f	Flange	Maf1
Type	mm	Nm	disk	Nm	mm	mm	mm	mm	bolts	Nm
FK240-80	70	6,000	100-72	29	240	206	136	24	6×M16	210
	80	9,000
FK300-90	85	11,000	125-72	58	300	260	160	24	6×M20	420
	95	15,000
FK340-100	100	17,600	140-71	100	340	280	190	24	5×M24	720
	110	22,600
FK400-120	115	31,000	165-71	240	400	350	228	30	8×M24	720
	125	39,000
FK400-130	130	44,000	175-71	240	400	350	228	30	8×M24	720
	140	52,000
FK470-150	145	72,000	200-71	240	470	416	278	36	10×M30	1450
	160	90,000
FK560-180	170	120,000	240-71	470	560	496	322	36	16×M30	1450
	190	156,000
FK560-190	200	184,000	260-71	470	560	496	368	36	16×M30	1450
	210	204,000
FK590-220	220	245,000	280-71	470	590	526	392	40	18×M30	1450
	230	273,000
FK630-240	235	277,000	300-71	470	630	550	408	40	18×M30	1450
	240	293,000
FK710-260	250	394,000	340-71	470	710	656	450	40	24×M30	1450
	270	466,000
FK710-280	280	507,000	360-71	470	710	656	450	40	24×M30	1450
	300	595,000